<form id="9xzr7"><menuitem id="9xzr7"><menuitem id="9xzr7"></menuitem></menuitem></form>
<noframes id="9xzr7"><pre id="9xzr7"></pre>
<meter id="9xzr7"><nobr id="9xzr7"><font id="9xzr7"></font></nobr></meter>
<ol id="9xzr7"><track id="9xzr7"></track></ol>

    <menuitem id="9xzr7"></menuitem>

        <track id="9xzr7"><dfn id="9xzr7"><menuitem id="9xzr7"></menuitem></dfn></track>

          <progress id="9xzr7"></progress>
          <address id="9xzr7"><var id="9xzr7"><mark id="9xzr7"></mark></var></address>
          <address id="9xzr7"><nobr id="9xzr7"><listing id="9xzr7"></listing></nobr></address>

          <address id="9xzr7"></address>
            聯系我們
            聯系人:xx
            轉讓電話:13313028229
            地址:xx
            新聞動態
            風電基礎模具的概述是基于對風電設施大小而定制的
            風電基礎模具的概述是基于對風電設施大小而定制的,因為風力發電的裝備比較大,所以底部的基礎需要做好,而且深度與直徑需要控制好,尤其是直徑,往往都是比較大的,在進行制作的時候加工的時間也會長一些,這種模具是為了幫助風力發電機進行加工,在生產的時候必須使用規格在5mm以上的鋼吧來進行模具的制作,如果鋼板過薄的情況就會讓模具的抗壓效果降低,而且對于風電基礎模具來說,整體的長度會超過二十米,澆筑大量的泥漿會讓模具承受過大的壓力,自然也就需要模具用到高規格的材料進行加工制作了,只有這樣才能夠保證好模具成型正常的使用,模具在使用的時候需要現場澆筑成型,自然也就需要用到大量的工具包括加工設備了,多名工人與機器同時進行模具的組裝,在風電基礎模具的外側也需要使用一些工具進行加固。
            The overview of wind power foundation mold is customized based on the size of wind power facilities. Because the equipment of wind power generation is relatively large, the foundation at the bottom needs to be done well, and the depth and diameter need to be well controlled. Especially the diameter is often relatively large, and the processing time is longer when making. This kind of mold is to help the wind turbine to process, During production, the steel bar with the specification of more than 5mm must be used to make the mold. If the steel plate is too thin, the compressive effect of the mold will be reduced. Moreover, for the wind power foundation mold, the overall length will exceed 20m. Pouring a large amount of mud will make the mold bear too much pressure, Naturally, the mold needs to be processed and manufactured with high-specification materials. Only in this way can the normal use of mold forming be ensured. When the mold is used, it needs to be cast on site. Naturally, a large number of tools, including processing equipment, are needed. Multiple workers and machines assemble the mold at the same time, Some tools also need to be used to reinforce the outside of the wind power foundation mold.

            北京鼎锘恒潤建筑裝飾有限公司

            1. 電話:13313028229
            2. 網址:www.lloritans.com

            版權風電基礎鋼模具匠心廠網址:www.lloritans.com 推薦:防撞墻模板,箱式護坡模具,檢查井模板,風電基礎鋼模具

             

            人妻中字视频中文乱码_久久精品国产亚洲AV麻_久久女人爽女人爽_黑人太大太长疼死我了