<form id="9xzr7"><menuitem id="9xzr7"><menuitem id="9xzr7"></menuitem></menuitem></form>
<noframes id="9xzr7"><pre id="9xzr7"></pre>
<meter id="9xzr7"><nobr id="9xzr7"><font id="9xzr7"></font></nobr></meter>
<ol id="9xzr7"><track id="9xzr7"></track></ol>

    <menuitem id="9xzr7"></menuitem>

        <track id="9xzr7"><dfn id="9xzr7"><menuitem id="9xzr7"></menuitem></dfn></track>

          <progress id="9xzr7"></progress>
          <address id="9xzr7"><var id="9xzr7"><mark id="9xzr7"></mark></var></address>
          <address id="9xzr7"><nobr id="9xzr7"><listing id="9xzr7"></listing></nobr></address>

          <address id="9xzr7"></address>
            聯系我們
            聯系人:xx
            轉讓電話:13313028229
            地址:xx
            新聞動態
            現澆混凝土樓地面一次澆筑質量把控
            若想確保地面一次澆筑成型,對施工質量的把控是必不可少的內容。預拌混凝土廠家須按工程設計要求,提前提供混凝土級配單,確保與實際情況相符。進場混凝土質量應確保滿足要求,級配程度和坍落度等因素應在要求范圍內。除此之外,還應確保哪些細節?
            If we want to ensure that the ground is cast in one time, it is essential to control the construction quality. Pre-mixed concrete manufacturers should provide concrete gradation sheets in advance according to engineering design requirements to ensure conformity with the actual situation. The quality of entering concrete should be guaranteed to meet the requirements, and the factors such as gradation and slump should be within the requirements. What other details should be ensured?
            外觀質量
            Appearance quality
            混凝土成型外觀是最直觀的質量情況,澆筑時應確保符合建筑地面工程施工質量驗收規范中外觀質量的驗收標準,地面面層必須無空鼓,表面潔凈無裂紋、脫皮、麻面和起砂等現象。
            The appearance of concrete is the most intuitive quality situation. When pouring, it should ensure that it conforms to the acceptance criteria of appearance quality in the acceptance criteria for construction quality of building ground works. The surface layer must be free of empty drum, and the surface must be clean and free of cracks, peeling, flax and sand.
            表面平整度
            Surface smoothness
            樓地面平整度有允許偏差要求,為確保成品符合符合建筑地面工程施工質量驗收規范中表面平整度的驗收標準,表面平整度允許偏差4mm,用2米靠尺和鍥形塞尺檢查。
            In order to ensure that the finished product meets the acceptance standard of surface smoothness in gaopin.37ix.com.cnfangfumu.37ix.com.cn bianyaqifj.37ix.com.cnpvcsuomo.37ix.com.cnshuiniji.37ix.com.cn caiguang.37ix.com.cnthe acceptance code for construction quality of building ground engineering, the surface smoothness allowable deviation is 4 mm, which is checked by 2-meter gauge and tine plug gauge.
            防滲質量
            Impervious quality
            樓地面應確保不倒泛水、無滲漏、無積水,與地漏(管道)接合處嚴密平順。
            Floor should ensure that there is no flooding, no leakage, no water accumulation, and the joint with ground leakage (pipeline) is tight and smooth.

            北京鼎锘恒潤建筑裝飾有限公司

            1. 電話:13313028229
            2. 網址:www.lloritans.com

            版權風電基礎鋼模具匠心廠網址:www.lloritans.com 推薦:防撞墻模板,箱式護坡模具,檢查井模板,風電基礎鋼模具

             

            人妻中字视频中文乱码_久久精品国产亚洲AV麻_久久女人爽女人爽_黑人太大太长疼死我了