<form id="9xzr7"><menuitem id="9xzr7"><menuitem id="9xzr7"></menuitem></menuitem></form>
<noframes id="9xzr7"><pre id="9xzr7"></pre>
<meter id="9xzr7"><nobr id="9xzr7"><font id="9xzr7"></font></nobr></meter>
<ol id="9xzr7"><track id="9xzr7"></track></ol>

    <menuitem id="9xzr7"></menuitem>

        <track id="9xzr7"><dfn id="9xzr7"><menuitem id="9xzr7"></menuitem></dfn></track>

          <progress id="9xzr7"></progress>
          <address id="9xzr7"><var id="9xzr7"><mark id="9xzr7"></mark></var></address>
          <address id="9xzr7"><nobr id="9xzr7"><listing id="9xzr7"></listing></nobr></address>

          <address id="9xzr7"></address>
            聯系我們
            聯系人:xx
            轉讓電話:13313028229
            地址:xx
            新聞動態
            鋼結構加工制作的工藝程序
            鋼結構加工制作的工藝程序
            Process procedure for making steel structure
            1、 建筑設計院提供的設計圖是不能直接用來加工制作鋼結構,而是要考慮加工工藝,如公差配合、加工余量、焊接控制等因素后,在原設計圖的基礎上繪制加工制作圖。加工制作圖是最后溝通設計人員及施工人員的意圖,它起到制作要領書的作用,又是實際尺寸、劃線、剪切、坡口加工、打孔、彎制、拼裝、焊接、涂裝、產品檢查、堆放、發送等各項作業的指示書,還起到進行高水平管理的檢查表的作用。
            1. The design drawings provided by the architectural design institute can not be used directly to make the steel structure, but to consider the processing technology, such as tolerance coordination, machining allowance, welding control and so on, and draw the drawing drawings on the basis of the original design drawings. The processing drawing is the intention of communicating the designer and the constructors at the end. It plays the role of making the important books. It is also the reference book of the actual size, line, cutting, groove processing, drilling, bending, assembling, welding, painting, product inspection, stacking, sending and so on. It also plays a high level of management. Check the function of the table.

            2.加工制作前施工條件的分析
            Analysis of construction conditions before 2. processing and making
            繪制加工制作圖或審查設計圖應邊審邊分析研究施工條件或者難易程度,必須認真分析焊接難度大的部分,是否使用高強螺栓及緊固器具,在狹窄處能否保持焊條的焊接角度等。
            It is necessary to analyze and study the construction conditions or difficulty degree by drawing or examining the design drawings. It is necessary to carefully analyze the difficult parts of the welding, whether the high strength bolts and fasteners are used, and the welding angle of the electrode should be kept in the narrow place.
            3.鋼卷尺 ?在鋼結構工程中,主要使用皮尺、寬帶鋼卷尺及凸面鋼卷尺中任何一種一級產品。最好使工廠用卷尺和現場用卷尺屬同一類產品,也就是各工種之間使用“同一把尺”。如果有困難,則10m之間的相互差值控制在0.5mm之內。
            3. steel tape. In steel structure engineering, it is mainly used in all kinds of grade products, such as tape, broadband steel tape and convex steel tape. It is better to use the tape and field tape as the same kind of products, that is to say, the "same ruler" is used among all kinds of work. If there are difficulties, the difference between 10m is controlled within 0.5mm.
            4.上崗操作人員應進行培訓和考核,特殊工種應進行資格確認,充分做好各項工序的技術交底工作。
            4., the operators should be trained and checked, special jobs should be identified and the technical disclosure of each process should be well done.

            北京鼎锘恒潤建筑裝飾有限公司

            1. 電話:13313028229
            2. 網址:www.lloritans.com

            版權風電基礎鋼模具匠心廠網址:www.lloritans.com 推薦:防撞墻模板,箱式護坡模具,檢查井模板,風電基礎鋼模具

             

            人妻中字视频中文乱码_久久精品国产亚洲AV麻_久久女人爽女人爽_黑人太大太长疼死我了