<form id="9xzr7"><menuitem id="9xzr7"><menuitem id="9xzr7"></menuitem></menuitem></form>
<noframes id="9xzr7"><pre id="9xzr7"></pre>
<meter id="9xzr7"><nobr id="9xzr7"><font id="9xzr7"></font></nobr></meter>
<ol id="9xzr7"><track id="9xzr7"></track></ol>

    <menuitem id="9xzr7"></menuitem>

        <track id="9xzr7"><dfn id="9xzr7"><menuitem id="9xzr7"></menuitem></dfn></track>

          <progress id="9xzr7"></progress>
          <address id="9xzr7"><var id="9xzr7"><mark id="9xzr7"></mark></var></address>
          <address id="9xzr7"><nobr id="9xzr7"><listing id="9xzr7"></listing></nobr></address>

          <address id="9xzr7"></address>
            聯系我們
            聯系人:xx
            轉讓電話:13313028229
            地址:xx
            新聞動態
            搭建LOFT鋼結構閣樓要點
            一、前提
            First, precondition
            1、 首先得查閱原始建筑土建資料,看看原建筑設計時是考慮何種類型的。如果在建筑設計時特別要求避免的隔層方案得首先放棄。
            1, first of all, we need to look at the data of the original architecture and see what types of buildings are considered in the original design. If we want to avoid the interlayer scheme in architectural design, we must give up first.
            2、 你的房子必須有足夠的層高。一般來說,復式房的新建閣樓的樓板的下緣與原一層的樓板下緣相平。單層的閣樓樓板的下緣不低于2.6米。閣樓樓板與屋頂的內凈高不低于2.4米,最低不低于2.2米。這是以有人員居住為前提的,如果你的閣樓是不住人的,那么你自己可以隨意定奪高度。
            2, your house must have enough floor height. Generally speaking, the lower edge of the new loft of the duplex house is flat with the lower floor of the original floor. The bottom edge of the single floor attic floor is not less than 2.6 meters. In the attic floor and the roof height of not less than 2.4 meters, a minimum of not less than 2.2 meters. This is based on the premise of personal residence. If your loft is not human, you can arbitrarily decide the height.
            3、 閣樓的最短的兩邊的跨度不得太大。在使用槽鋼搭建的情況下,一般不宜超過4米,最大不得超過6米。
            3, the shortest distance between the two sides of the attic should not be too large. In the case of channel construction, it should not exceed 4 meters, and the maximum should not exceed 6 meters.
            二、注意要點
            Two. Pay attention to the main points
            1、制作閣樓之前最好找幾家比較專業的閣樓公司設計一下閣樓鋼結構的設計方案。
            1, before making the attic, we'd better find several relatively professional attic companies, and design the design of the attic steel structure.
            2、確定閣樓鋼結構用的材質,(跨度超過3.5米.最好用國標鋼)。有的不專業的閣樓 公 司推薦業主用方鋼做不可取,(方鋼不能里外全面防銹.容易氧化,厚度比較薄) 正確應該用槽鋼或工字鋼。
            2, determine the material used for the steel structure of the attic, which is more than 3.5 meters across. Some unprofessional attic companies recommend that the owner do not use Fang Gang, (Fang Gang can not be completely rustproof inside and outside. Easy oxidation, thin thickness) should be used in channel steel or I-steel.
            3、框架結構的房子都是空心磚、做閣樓的時候墻體里應該用槽鋼做個梁、如果只在墻體上摳個洞就架槽鋼.空心磚單一受力.很容易劃落。
            3, the frame structure of the house are hollow bricks, when the attic, the wall should be used as a beam in the wall, if only on the wall to pick holes in the frame channel steel. The hollow brick is single force. It is easy to draw down.
            4、閣樓鋼結構槽鋼。角鋼鋪設最加尺寸是610mm*610mm,是根據細木工板1.22米*2.44米定的。不然會浪費很多板子。
            4. The steel structure channel steel of the attic. The most important dimension of angle steel is 610mm*610mm, which is based on Blockboard 1.22 meters *2.44 meters. Otherwise, it would waste a lot of boards.
            5、槽鋼和角鋼焊接一定要在一個平面。在槽鋼底下焊,放板子的時候會擔的不實,焊接之后一定要打平。
            5, the welding of channel steel and angle steel must be in a plane. Welding under the channel steel and placing the boards will be false. After welding, we must level.
            6、槽鋼和槽鋼連接處最好用插卯焊法。
            6, the connection between channel steel and channel steel is best to adopt plug welding.
            7、防銹也很重要,剛結構包在里面吸潮容易,散潮難(尤其衛生間上面的閣樓)。最好在制作之前做一變除銹處理。
            7, rust prevention is also very important. Rigid structure bag is easy to absorb moisture and difficult to disperse (especially the loft on the toilet). It is best to do a change of rust removal before making the production.

            北京鼎锘恒潤建筑裝飾有限公司

            1. 電話:13313028229
            2. 網址:www.lloritans.com

            版權風電基礎鋼模具匠心廠網址:www.lloritans.com 推薦:防撞墻模板,箱式護坡模具,檢查井模板,風電基礎鋼模具

             

            人妻中字视频中文乱码_久久精品国产亚洲AV麻_久久女人爽女人爽_黑人太大太长疼死我了